Washington Components Washington Components Washington Components Washington Components Washington Components Washington Components
Welcome to Washington Components Ltd Contact us on +44 (0)191 416 9676 or sales@washingtoncomponents.co.uk

Machining Capability / Type

PUMA 400L
770mm Swing, 590mm max. machining diameter, 2000mm between centres		 CNC Lathe
PUMA 12L
570mm Swing,320mm max. machining diameter, 1020mm between centres		 CNC Lathe
PUMA 2600
480mm Swing, 76mm max. machining diameter, 755mm between centres		 CNC Lathe
LYNX 210L
460mm Swing, 280mm max. machining diameter, 500mm between centres		 CNC Lathe
TMC 30
500mm Swing, 330mm max. machining diameter, 550mm between centres		 CNC Lathe
LYNX 220
510mm Swing,320mm max. machining diameter, 525mm between centres		 CNC Lathe
TMC 15
300mm Swing,180mm max. machining diameter, 270mm between centres		 CNC Lathe
LYNX 220
510mm Swing,320mm max. machining diameter, 525mm between centres		 CNC Lathe
LYNX 220
510mm Swing,320mm max. machining diameter, 525mm between centres		 CNC Lathe
LYNX 300
650mm Swing, 450mm max. machining diameter,765mm between centres		 CNC Lathe
LYNX 220
510mm Swing,320mm max. machining diameter, 525mm between centres		 CNC Lathe
Nakamura AS200
437mm Swing,340mm max. machining diameter, 570mm between centres		 CNC Lathe
DOOSAN DNM650
Travel: 1270mm x 670mm x 625mm 		CNC Mill
DAEWOO ACE H400P
Travel: 650mm x 560mm x 560mm 		CNC Mill
DAEWOO MYNX NM510
Travel: 1020mm x 510mm x 510mm 		CNC Mill
DAHLIH MVC 1350
Travel: 1346mm x 635mm x 711mm 		CNC Mill
DAHLIH MVC 1350
Travel: 1346mm x 635mm x 711mm 		CNC Mill
TAKISAWA MAC-V5
Travel: 900mm x 450mm x 610mm 		CNC Mill
HERBERT 9C-30
800mm Swing, 790mm max. machining diameter,1000mm between centres		 Lathe
HERBERT 9C-30
800mm Swing, 790mm max. machining diameter,1000mm between centres		 Lathe
COLCHESTER 2000
380mm Swing, 280mm max. machining diameter,770mm between centres		 Lathe

Welding

All business processes are accredited to ISO9001:2015.

Additionally, Welding is 3rd party accredited to ISO3834:PT2.

  • A highly qualified team of welding technicians and welding co-ordinator supported by highly experienced welding engineers.
  • All welding inspectors are qualified to CSWIP 3.1 and CSWIP 3.0.
  • A comprehensive array of WPQR's / WPS's to ASME IX, ISO 15614-1, AWS D1.1 and NORSOK.
  • Welders are qualified to ASME IX, EN 287-1, 9606-2, AWS D1.1 and NORSOK.
  • An extensive range of material welding capabilities including carbon steel, stainless steel, duplex and super duplex.
  • Processes used include GSFCAW, GTAW, GMAW, FCAW and MMA.

    • Washington Components Ltd, Hertburn Indusrial Estate, Washington, Tyne and Wear, NE37 2SA, UK

    Tel: +44 (0)191 416 9676 | Email: sales@washingtoncomponents.co.uk

     

    © 2014 Washington Components Ltd. All Rights Reserved. | Site by ITC Service